Firmware Upgrade - Tenda MX15 Pro User Manual

4.9.7

Firmware upgrade

For better performance of the new firmware of the Mesh device, you are recommended to reset the
Mesh device to factory settings and re-configure the Mesh device after the upgrade completes.
Upgrade a node
To perform online upgrade on a single node:
Log in to the web UI (mobile
Step 1
Tap Detect Upgrade for a node.
Step 2
Controller is used for example.
Tap Online Upgrade.
Step 3
Wait until the upgrade completes. Then, access the Firmware Upgrade page again and
check whether the upgrade is successful based on Current Version
---End
client), and navigate to More > Firmware Upgrade.
285
Document version: V1.0
.