Top View; Kvm Breakout Cable - Lenovo ThinkSystem SD650 V3 User Manual

Table 2. SD650 V3 tray indicators, controls, and connectors (continued)
1 Gb RJ45 Ethernet port with share-NIC
4
feature for Lenovo XClarity Controller. See
"Front LEDs" on page 211
information.
NMI button.
5
Press this button to force a nonmaskable
interrupt to the processor. You might have to
use a pen or the end of a straightened paper
clip to press the button. You can also use it to
force a blue-screen memory dump. Use this
button only when you are directed to do so by
Lenovo Support.

Top view

This section contains information on the top view of the solution.
Figure 3. Compute node top view
Table 3. Components on the compute node top view
System board
1
Water loop quick connect
2
Power distribution board
3
Processor cold plates
4

KVM breakout cable

Use this information for details about the KVM breakout cable.
Use the KVM breakout cable to connect external I/O devices to the compute node. The KVM breakout cable
connects through the KVM connector (see
connectors for a display device (video), one USB 3.0 (5 Gbps) connectors for a USB keyboard and mouse,
and a serial interface connector.
The following illustration identifies the connectors and components on the KVM breakout cable.
ThinkSystem SD650 V3 Neptune DWC Tray User Guide
18
25 Gb SFP28 Ethernet port. See
9
more information.
for more
10
XClarity Controller. See
information.
"Front view" on page
25 Gb SFP28 Ethernet port with share-NIC feature for Lenovo
"Front LEDs" on page 211
Memory module cold plates
5
PCIe 5.0 x16 slot 2 or drive bay 0/1
6
PCIe 5.0 x16 slot 1 or drive bay 2/3
7
17). The KVM breakout cable has
"Front LEDs" on page 211
for more
for