MQ Power WHISPERWATT DCA150SSJU4F2 Operation Manual page 66

5. Press the [SELECT] button (Figure 95) to enter the
"Escape Mode" menu.
FORCE REGEN
FAULT DIAGNOSTICS
ABOUT UNIT
USER LOGIN
CUSTOMER OPTIONS
ADVANCED OPTIONS
ESCAPE MODE
UP
Figure 95. Escape Mode (Select Button)
6. Press the [REQUEST] button (Figure 96) to send
"Escape Mode Request" signal to ECM.
ESCAPE MODE REQUEST
EMERGENCY RESERVE ENGINE
RUN MAY BE POSSIBLE.
TO ATTEMPT ESCAPE MODE:
PRESS THE REQUEST SOFT KEY.
EXIT
Figure 96. Escape Mode (Request Button)
7. Once the [REQUEST] button has been pressed,
the display will indicate that escape mode has been
activated (Figure 97).
PAGE 66 — DCA150SSJU4F2/F3 60 HZ GENERATOR • OPERATION MANUAL — REV. #0 (02/16/22)
DOWN SELECT
[SELECT]
BUTTON
REQUEST
[REQUEST]
BUTTON
ESCAPE MODE REQUEST
EMERGENCY RESERVE ENGINE
RUN MAY BE POSSIBLE.
>> ESCAPE MODE ACTIVATED <<
POWER OFF. ON. TO RESTART
TO ATTEMPT ESCAPE MODE:
PRESS THE REQUEST SOFT KEY.
EXIT
Figure 97. Escape Mode Activated Screen
8. Place the Auto Start/Stop Switch (Figure 98) in the
"Off/Reset" position.
AUTO
OFF/RESET
(CENTER)
Figure 98. Auto Off/Reset Manual Switch
(Off/Reset Position)
9. Place the Auto Start/Stop Switch (Figure 99) in the
"Manual" position to start the engine.
AUTO
OFF/RESET
Figure 99. Auto-Off/Reset Manual Switch
(Manual Position)
MAINTENANCE
REQUEST
MANUAL
MANUAL