Table of Contents
Advertisement
°
IMPORTANT NOTES
Placement
• Do not allow lighting devices that normally are used
while their light source is very close to the unit (such
as a piano light), or powerful spotlights to shine upon
the same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
• Do not allow objects to remain on top of the keyboard.
This can be the cause of malfunction, such as keys
ceasing to produce sound.
Care of the Keyboard
• Do not write on the keyboard with any pen or other
implement, and do not stamp or place any marking on
the instrument. Ink will seep into the surface lines and
become unremovable.
• Do not affix stickers on the keyboard. You may be
unable to remove stickers that use strong adhesives,
and the adhesive may cause discoloration.
• To remove stubborn dirt, use a commercially available
keyboard cleaner that does not contain abrasives. Start
by wiping lightly. If the dirt does not come off, wipe
using gradually increasing amounts of pressure while
taking care not to scratch the keys.
Concerning the Care of the Unit (Mirror Finish)
• The surface of this unit has been polished so as
to create a high-gloss, mirror-like finish. Since this
beautiful finish is as delicate as that of the highest
quality, wood-crafted furniture, it needs to be cared for
at regular intervals. Please make sure to observe the
following when caring for the unit.
• For routine care, gently clean the surface using a soft
cloth or a piano-use feather duster. You must avoid
applying any force, since even the tiniest particles
of sand or grit can produce scratches if you wipe
too hard.
• If the finish loses its luster, use a soft cloth
dampened with some polishing liquid to evenly
wipe the surface of the unit.
• Avoid using detergents or other cleaners, as they can
cause the surface finish to deteriorate. This may lead
to the formation of cracks or other imperfections.
Also, do not use chemically-enhanced cleaning
cloths.
• Precautions concerning the use of polishing agents
• Refer to the instructions that came with the
polishing agent for instructions on its proper use.
• Use only polishing agents that are designed
specifically for use on the mirror finishes of pianos.
By using any other product, you risk causing
scratches, deformation, discoloration, etc. To
purchase an appropriate product, please consult the
nearest musical instrument store.
• Use the product only on the portions of this unit that
have a mirror-like finish, and using an even touch,
apply it equally over the entire surface. If you apply
more force in one place over another, you risk losing
some of the luster of the finish.
• Store in a location that is out of the reach of small
children. If accidentally ingested, induce vomiting
immediately. Then, see a doctor to obtain a
diagnosis.
Repairs and Data
• Before sending the unit away for repairs, be sure to
write down the needed information. Although we will
do our utmost to preserve the data stored in your unit
when we carry out repairs, in some cases, such as when
the memory section is physically damaged, restoration
of the stored content may be impossible. Roland
assumes no liability concerning the restoration of any
stored content that has been lost.
38
Additional Precautions
• Any data stored within the unit can be lost as the result
of equipment failure, incorrect operation, etc. To protect
yourself against the irretrievable loss of data, be sure to
write down the needed information.
• Roland assumes no liability concerning the restoration
of any stored content that has been lost.
• Never strike or apply strong pressure to the display.
• The sound of keys being struck and vibrations produced
by playing an instrument can be transmitted through a
floor or wall to an unexpected extent. Please take care
not to cause annoyance to others nearby.
• Do not apply undue force to the music rest while it is
in use.
• Do not use connection cables that contain a built-in
resistor.
Using External Memories
• Please observe the following precautions when
handling external memory devices. Also, make sure to
carefully observe all the precautions that were supplied
with the external memory device.
• Do not remove the device while reading/writing is
in progress.
• To prevent damage from static electricity, discharge
all static electricity from your person before
handling the device.
Caution Regarding Radio Frequency Emissions
• The following actions may subject you to penalty of law.
• Disassembling or modifying this device.
• Removing the certification label affixed to the back
of this device.
• Using this device in a country other than where it
was purchased
Intellectual Property Right
• It is forbidden by law to make an audio recording,
video recording, copy or revision of a third party's
copyrighted work (musical work, video work, broadcast,
live performance, or other work), whether in whole or in
part, and distribute, sell, lease, perform or broadcast it
without the permission of the copyright owner.
• Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard to any
infringements of third-party copyrights arising through
your use of this product.
• The copyright of content in this product (the sound
waveform data, style data, accompaniment patterns,
phrase data, audio loops and image data) is reserved by
Roland Corporation.
• Purchasers of this product are permitted to utilize said
content (except song data such as Demo Songs) for
the creating, performing, recording and distributing
original musical works.
• Purchasers of this product are NOT permitted to
extract said content in original or modified form, for
the purpose of distributing recorded medium of said
content or making them available on a computer
network.
• Roland is either registered trademarks or trademarks of
Roland Corporation in the United States and/or other
countries.
• Company names and product names appearing in this
document are registered trademarks or trademarks of
their respective owners.
• This product contains eParts integrated software
platform of eSOL Co.,Ltd. eParts is a trademark of eSOL
Co., Ltd. in Japan.
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Roland is under license.
• This Product uses the Source Code of μT-Kernel under
T-License 2.0 granted by the T-Engine Forum (www.
tron.org).
• The "Chinese language font MORISAWA SONG
GB2313BMP12" used by this product is provided by
Morisawa Corporation, and copyright to the font data is
the property of that corporation.
• This product includes third party open source software.
Copyright © 2009-2018 Arm Limited. All rights reserved.
Copyright © 2018 STMicroelectronics. All rights
reserved.
Licensed under the Apache License, Version 2.0 (the
"License");
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Copyright © 2018 STMicroelectronics. All rights
reserved.
This software component is licensed by ST under BSD
3-Clause license, the "License";
You may obtain a copy of the License at
https://opensource.org/licenses/BSD-3-Clause
• This product is using the Jansson (http://www.digip.
org/jansson/) source code.
Copyright © 2009-2016 Petri Lehtinen <petri@digip.
org> Released under the MIT license http://opensource.
org/licenses/mit-license.php
Advertisement
Table of Contents
