Table of Contents
Advertisement
Audio Dubbing
CD Player
M ixer output
N O TES:
● When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the mixed
sound (Hi-Fi + Normal soundtracks), press AUDIO MONITOR on
the remote control to select "L+R+NORM" (
● Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
● Audio dubbing is also possible using the rear panel AV1 IN/
OUT or AV2 IN connector. When using these connectors,
make sure to select the correct input mode in step 2 .
● Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
● When playing back an audio-dubbed tape, press
M O N ITO R on the remote control to select the soundtrack
you wish to hear (
Downloaded from:
https://www.usersmanualguide.com/
5/8
6
q
1
¡
CD Player
Audio mixer
O riginal sound
AU D IO O U T
5/8
6
q
1
¡
pg. 16).
AU D IO
pg. 16).
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
Normal audio track
Video/Hi-Fi audio
track
8
MAKE CO N N ECTIO N S
Connect an audio component to the AUDIO IN L + R
1
connectors on the recorder's front panel.
● When connecting monaural equipment, use only the
recorder's AUDIO IN L connector.
SET IN PUT MO DE
2
Press N U M BER key "0" and/or TV PRO G. so that "F-
AU" appears in place of a channel number.
LO CATE ST ART PO IN T
3
Press PLAY to start playback of the tape in your
recorder, and press PAU SE when you find the point
where you want to start dubbing.
EN GAGE AUDIO DUBBIN G
Press A. D U B .
4
● Your recorder enters the Audio Dubbing Pause mode.
("
" blinks, "
display panel.)
● To perform audio dubbbing with audio mixing, press
AU D IO M O N ITO R on the remote control to select "L
8
+ R" at this point. *Audio dubbing with audio mixing
is not possible if you're using a monaural audio
component, or if you don't have an audio mixer.
ST ART DUBBIN G
Engage the audio component's Play mode, then press
5
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
● "
" blinks and "
display panel.
● To stop dubbing temporarily, press
PLAY to resume dubbing.
EN D AUDIO DUBBIN G
Press STO P to stop the tape in your recorder, and
6
engage the audio component's Stop mode.
EN
Pre-recorded tape
Audio-dubbed tape
" and "
" light up on the front
" is displayed on the front
PAU SE . Press
37
Advertisement
Table of Contents
