Table of Contents
Advertisement
12
EN
Ba sic
Pla yba ck
Turn on the TV and select the VIDEO channel (or AV mode).
REW
Downloaded from:
https://www.usersmanualguide.com/
5/8
6
STO P/ EJECT
q
1
¡
2
1
2
3
4
5
6
7
8
9
0
4
FF
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
LO AD A CASSETTE
Make sure the window side is up, the rear label side is
1
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
pressure when inserting.
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● If the record safety tab has been removed, playback
begins automatically.
FIN D PRO GRAMME ST ART
PO IN T
If the tape is advanced past the start point, press REW or
2
8
turn the TIM E SCAN SH U TTLE ring to the left.
To go forward, press FF or turn the TIM E SCAN
SH U TTLE ring to the right.
ST ART PLAYBACK
3
Press PLAY . " BEST" appears blinking in the recorder's
display panel during automatic tracking. (
STO P PLAYBACK
Press STO P on the remote or STO P/ EJECT on the
4
recorder's front panel. Then press STO P/ EJECT to
remove the cassette.
U sable cassettes
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back a recorded Super VHS tape.
PLAYBACK
pg. 22)
Advertisement
Table of Contents
