Carrier CDII-184R1-0CTR4 Installation & Operation Manual page 2

General Instructions
• Only Carrier authorized dealer or Carrier service technician, is allowed to do installation/ troubleshooting/
servicing.
• Make sure main power is OFF while doing any wiring connections and servicing. Before inserting power
plug into receptacle, check the voltage without fail.
• Ensure power source is the same as the name plate.
• After complete installation & verification of wiring connections, do a test operation to Check unit
operation and follow troubleshooting tips in case of any error / malfunctioning.
• Always adopt the LOCK OUT/TAG OUT while dealing with any type of energy, refer ANNEXURE 2.
• All values of parameters & dimensions given in this document are for reference only (subjected to
change without notice due to continuous improvement).
• In case of any concern, call Carrier Service Helpline number as mentioned on last page.
• Instructions on addition charging of refrigerants are detailed in below part.
Model Indoor Unit
7 HP CDII-184R1-0CTR4
11 HP CDII-299S1-0CTR4
14 HP CDII-378S1-0CTR4
22 HP CDII-573S2-0CTR4
CDIC-287S1-1CTR4
(MASTER)
REMOTE CONTROL
Corded type
(Standard)
Outdoor unit
CDIC-184R1-0CTR4
CDIC-299S1-0CTR4
CDIC-378S1-0CTR4
CDIC-287S1-2CTR4
(SLAVE)
Coded Remote controller
Wireless
with Error logging feature
(Optional)
2
Mode Refrigerant
Cool
R410A
Only
(Optional)