Radio Volume; Clock And Calendar; How To Set The Time And Date - Oregon Scientific WR103 User Manual

6. When finished, press COUNTY to advance to the
next county-code field, or wait 9 seconds to
automatically return to clock-display mode.

RADIO VOLUME

Before you can set the volume, the radio needs to be in
NOAA on mode.
To set the radio volume:
1. In Clock-Display Mode, with the radio set to NOAA
on, press or to adjust the volume.
2. With the volume setting displayed, press
change the volume, maximum volume is 7, no
sound is 1.

CLOCK AND CALENDAR

The Clock-Display mode is the unit's default display
mode. When in another display mode it will automatically
return to the Clock-Display after 9 seconds.
Setting the clock and calendar is sequential. Any part of
the setting sequence can be bypassed by pressing
MODE. Once changes are made and the setting mode
has been exited, the day-of-the-week will automatically
be determined. Days of the week are viewable in 3
languages: English, French and Spanish.

HOW TO SET THE TIME AND DATE

You can choose between 12 / 24-hour clock or month /
day, day / month display format.
At any stage of the setting sequence, if no entry
NOTE
is made after 9 seconds, the unit will automatically exit the
Clock-Setting mode and return to the Clock-Display mode.
To set the time:
1. In Clock-Display mode, press and hold MODE for
2 seconds.
2. Select either the 12 / 24-hour format. Press
or to
to switch between the 2 formats.
3. Make selection then press MODE to save and
advance to the next step.
4. To enter the hour digits, press
digits have been selected.
Pressing and holding
NOTE
in rapid sequence.
5. When the hour has been selected, press MODE to
save and to advance to the minute setting mode.
Press
12
or
or will advance digits
or to make the minutes selection.
or
until the hour