Radio Volume; How To Set The Time And Date - Oregon Scientific WR102 Instruction Manual

RADIO VOLUME

The radio volume can be adjusted for personal needs. To set the volume, the radio needs to be in NOAA-
On mode and any time display mode.
To set the volume:
1. Press [UP VOLUME] or [DOWN VOLUME] to adjust the volume.
2. When the volume setting is displayed, press [UP VOLUME] or
[DOWN VOLUME] to change volume if needed.
NOTE: The maximum volume setting is indicated by the number 7; no audio is indicated by the
number 1.
The Clock-Display Mode is the unit's default display mode. When in another display mode it will automatically
return to the clock display after 9-seconds.
Setting the clock and calendar is sequential. Any part of the setting sequence can be bypassed by pressing
[MODE]. Once changes are made and the setting mode has been exited, the day-of-the-week will automatically
be determined.

HOW TO SET THE TIME AND DATE

A special user-select option included is the 12-hour or 24-hour
clock-display choice and a display sequences option showing
either the current month first or the day-of-the-month first.
NOTE: At any stage of the setting sequence, if no entry is made after 9-seconds, the unit will
automatically exit the Clock-Setting Mode and return to the Clock-Display mode.
To set the time:
1.In Clock Display Mode, press and hold [MODE] for 2 seconds.
2.Select either the 12-hour or 24-hour format. Press [UP VOLUME] or [DOWN VOLUME] to switch
between the two formats.
3.Make time format selection then press [MODE] to save and advance to the next step.
4.To enter the hour digits, press [UP VOLUME] or [DOWN VOLUME] until the hour time and AM/PM
designation has been selected.
NOTE: Pressing and holding [UP VOLUME] or [DOWN VOLUME] will advance digits in rapid
sequence.
5.When the hour and AM/PM designation has been selected, press [MODE] to save and to advance to the
minute setting mode. Press [UP VOLUME] or [DOWN VOLUME] to make the minutes selection.
6.Press [MODE] to save the minutes selection and advance to setting the year. Press [UP VOLUME] or
[DOWN VOLUME] to make the year selection.
7.When the year has been selected, press [MODE] to save and to advance to setting the month. Press [UP
VOLUME] or [DOWN VOLUME] to select the month.
8.Press [MODE] to save the selected month and advance to day-of-the-month setting. Press [UP VOLUME]
or [DOWN VOLUME] to select the day-of-the-month.
9.When the day-of-the-month has been selected, press [MODE] to save and to advance to select the display
option of day-month (D / M) format or month-day (M / D) format. Press [UP VOLUME] or [DOWN VOLUME]
to switch between these two display options.
10.Press [MODE] or wait 9-seconds after making the day-month or month-day selection to exit the Clock-
Setting Mode and return to clock display mode.
USING THE CLOCK AND CALENDAR