Power On/ Off 3~4; Taking Photos - Oregon Scientific DCA6808 Instruction Manual

F)Taking Photos
1. Press MODE button to turn on the camera, the camera is set to take high-resolution pictures. The "status LCD"
will show "HI" and frame number "26". If there are already photos saved in the camera, the frame number will
show on the "status LCD" how many shots are available for shooting.
2. Aim your subject by using the camera viewfinder.
3. Press the "Shutter" button; a snapshot is finished with a distinct beeping sound. At the same time, the number on
the LCD display will increase by one.
Attention:
When the light is not sufficient, the Auto exposure and Gain control need more time to settle, you have to hold the
camera steadily and wait longer time for the beeping sound. If the environment is too dark to take picture, you will
hear "beep beep" sound and no picture can be taken.
Power on/off
Power On
Method 1
Press the MODE button until it switches to off mode.
Method 2
If the camera is not used in 30 seconds, it will enter standby
mode automatically to save battery energy.
Note:
If the camera is not in use for a long time, please take out the
battery. Photos will be lost after the battery is taken out.
4