Getting Started; Battery Installation; Turning The Power On / Off; Sleep Mode - Oregon Scientific DS6200 User Manual

Dual mode digital camera

Table of Contents

GETTING STARTED

1. Open the battery compartment cover.

2. Insert batteries according to the correct polarity (+ and -) as shown on the inside

of the battery compartment.

3. Close the battery compartment cover.

1. To turn the camera on, press POWER ON / OFF until a beep is heard and the

LCD screen is on. The camera is now ready to take pictures.

2. To turn the camera off, press POWER ON / OFF until the camera beeps and the

LCD screen is blank.

1. When the camera is turned on but is not being used for 60 seconds, it will

automatically go into sleep mode to save battery power.

2. To re-activate the camera from sleep mode, press POWER ON / OFF once. The

camera is ready to take the next picture.

1. Aim the camera and compose your image by looking through the viewfinder.

2. Press SHUTTER down. A buzz sound will be heard indicating that a picture has

been taken.

3. The LCD screen will show the number of pictures taken.

NOTE The camera stores all pictures in the built-in memory or Secure Digital (SD)

memory card.

Follow the flowchart below to access the camera's Preview Mode onscreen menu

options (Mode, Self-Timer, Flash, Exposure, Setup) and select / adjust their

respective settings.

Table of Contents