Web Cam Mode - Oregon Scientific DCA6808 Instruction Manual

11
I) Web Cam mode
The Web Cam mode lets you share video images of yourself with
your friends and family. To do this you will need a computer with
Internet access. Children should ask for parental supervision before
sending or receiving images over the Internet.
Connect your camera to the camera stand and set it up near your
computer. Point the camera at the image (yourself) you would like
to send and follow the instructions below to start the Web Cam
mode!
1. Turn your camera on. Connect it to your PC using the USB
cable. Be careful not to place your camera too far away from
your PC. You don't want the USB cable to become disconnected
from either your camera or your PC.
2. On your computer, open the folder titled "My DSC", double
click "PC Cam" icon to run the web cam activation program.
A square frame will be opened. If no image appears, you may
click "Preview" in the "Options" menu inside the frame to
activate the driver.
3. Click "Start Capture" inside the "Capture" menu to start
taking video. Click "Stop Capture" to end the video.
4. Click the "Video Capture Pin" inside the "Options" menu to
select the resolution of video. The default is QVGA (320 x 240).
Note: You can also run Arcsoft PhotoImpression 4 to
trigger web camera functionality. After opening the program,
press "Camera/Scanner" button on the left bottom and set
"Select Source" as "Dual-Mode DSC". Than, click the
"Video Camera" icon at bottom and press "Live", the video
image will appear in the main window, you can capture images
into your desired album.