Connecting Video Source Devices - Optoma DS550 User Manual

Connecting Video source devices

You can connect your projector to various Video source devices that provide
any one of the following output sockets:
HDMI
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one
of the above connecting methods, however each provides a different level of
video quality. The method you choose will most likely depend upon the
availability of matching terminals on both the projector and the Video source
device as described below:
Terminal name Terminal appearance
HDMI
Component
Video
S-Video
Video
Note
Not all models have HDMI input jack, please check your projector before connecting
HDMI
VGA1-IN/YPbPr or
VGA2-IN/YPbPr
S-VIDEO
VIDEO
Reference
"Connecting an
HDMI source
device" on
page 18
"Connecting a
Component Video
source device" on
page 18
"Connecting an
S-Video source
device" on
page 19
"Connecting a
composite Video
source device" on
page 20
Picture quality
Best
Better
Good
Normal
EN-17