Table of Contents
Advertisement
Chapter 3
OVERVIEW
TERMINAL MENU STRUCTURE
61200343L1-1
Operation
You can control and configure the Octal BRI S/T Module from a variety of
sources, including the following:
•
The ATLAS 800 Series front panel, providing minimal configuration and
status support
•
The terminal menus, allowing detailed configuration, status, and diag-
nostics
•
SNMP, primarily for reporting alarm conditions and system status
The remainder of this section describes the menu items presented when
managing the Octal BRI S/T Module via the terminal menu.
Access the terminal menu using either a VT-100 terminal attached to the
ATLAS 800 Series Base Unit's control port or a Telnet session established
through the Base Unit's Ethernet port. The ATLAS 800 Series User Manual
provides detailed instructions on the operation of each of these management
approaches.
To edit items in the terminal menu, you must have the appropriate
password level. Each menu description in this section indicates the
password level required for write and read access. See "Access
Passwords" in the appropriate ATLAS 800 Series User Manual
for detailed information on working with passwords. Security level
0 users can view and edit every available field. Security level 5
users can view any field but cannot edit.
ATLAS 800 Series uses a hierarchical menu structure to provide access to all
of its features. The top-most menu level leads to submenus which are
grouped by functionality. All menu items display in the terminal window.
Octal BRI S/T Module User Manual
27
Advertisement
Table of Contents
