Component Video Connection - Oppo BDP-80 User Manual

Oppo bdp-80: user guide
Table of Contents

Advertisement

I N S T A L L A T I O N

Component Video Connection

Audio
Component
Video
Y
Pb/Cb
Pr/Cr
If your TV has no digital video input but has component video inputs, please use a set of
component video cables to connect the component video output of the player to the TV. The
connectors are color coded, so please make sure the cable connections match on both ends.
The component video connection will produce a very clear picture with high color accuracy.
Please use the Red/White audio cables to connect the FL (Front Left) and FR (Front Right)
terminals of the player to the TV. Make sure the audio cables are connected to the same input
terminal group on the TV as the chosen component video input.
When the Output Resolution is set to "Source Direct" (see page 19 for details), the
component video connection will not output video when playing a Blu-ray Disc with 1080p 24Hz
content. This is not a malfunction. You can set "Primary Output" in the "Video Setup" menu
to "Component" (see page 46 for details) in order to properly use the component video
connection.
When playing a Blu-ray Disc, video resolution over the component output can be up to 1080i.
1080p content will be interlaced into 1080i signal for the component output.
Video up-conversion over the component output is only available for unencrypted discs such as
home video and consumer-created contents. Most commercially pressed DVD discs are CSS-
encrypted and will be limited to 480i/480p resolution. This restriction applies to the component
output only. The HDMI output is protected with HDCP and has no such restriction.
You may connect the composite video or S-Video cable to the TV for trouble-shooting purpose,
just in case there is a problem with component video. However it is not recommended to use
the composite video or S-Video as the primary method of video delivery to the TV, because it
only produces a standard definition video signal and forfeits the advantage of high definition
video.
Rear Panel
Audio
Cable
Method 3 – Component Video Connection to TV
Component Video Cables
12

Advertisement

Table of Contents
loading

Table of Contents