Copying Presets - Onkyo CR-315 Instruction Manual

CR515,315_En.book Page 45 Wednesday, June 7, 2006 2:36 PM

Copying Presets

With the Preset Copy function, you can organize your
presets in the order you want. When you copy a preset,
its name is also copied.
MENU/NO/
CLEAR
/
1 Select the preset you want to copy
(see page 42).
2 Press the [MENU/NO] button, and
then use the Previous and Next
[ ]/[
setCopy?"
3
Press [ENTER].
The number of the preset to be copied
flashes.
4
Use the Previous and Next
[ ]/[
destination preset.
The number of the destination preset
flashes.
ENTER
] buttons to select "Pre-
] buttons to select the
Listening to the Radio —Continued
5
To copy the preset, press
[ENTER].
If no station has yet been stored in the
destination preset, the station is copied
and "Complete" appears.
If a station has already been stored in the
destination preset, the message "Over-
write?" appears.
To overwrite the previously stored sta-
tion, press [ENTER].
To not overwrite the previously stored
station, press the [MENU/NO] button.
On the CR-515, you can also use the front panel con-
trols.
1 Select the preset you want to copy (see page 42).
2 Push the multi control, and then turn it to select "Pre-
setCopy?"
3 Push the multi control.
4 Turn the multi control to select the destination pre-
set.
5 To copy the preset, push the multi control.
Tip:
If you favorite station is stored in preset #5 and you want
to make it preset #1, copy preset #5 to preset #1. To keep
the station that's already stored in preset #1, you may
want to copy it to an unused preset first.
45