Troubleshooting - SMART SM-01-3600A Manual

14. TROUBLESHOOTING

9. TROUBLESHOOTING
when the engine Mill not start:
Is there fuel in
the tank?
Is there oil in
the tank?
Is there a spark from
the spark plug?
△
WARNING
!
is no soiled fuel around the spark
plug. Spilled fuel may ignite
Is the fuel reaching
the carburetor
If the engine still
does not start, take
the generator to an
authorized generator
No electricity at the AC receptacles:
Is the AC circuit breaker
ON
Check
appliance or equipment
for any defects
34
NO
YES
NO
YES
NO
Replace the
spark plug
To check:
1) Remove the spark plug
YES
2) Remove the spark plug and
Be sure there
3) Set the plug side electrode
YES
NO
To check:
1) Turn off the engine switch
YES
and loosen the drain screw.
2) Fuel should flow from tie
drain when the engine
switch is turned on.
NO
YES
the electrical
NO DEFECTS
DEFECTS
EN
Refill the fuel tank
Add the recommended
oil
STILL NO
SPERAK
Take the generator to an
authorized generator dealer
cap and clean any dirt
from around the spark plug.
install the spark plug in the
plug cap.
on the cylinder head.
Crank the engine, sparks
should, jump across the gap
Clean the
sediment cup
24
Turn the AC
circuit breaker
Take the generator to an
authorized generator dealer
Replace the
appliance or equipment.
Take the
appliance or equipment
to an electrical shop for
repair.
fuel
electrical
electrical