Transporting Storage - SMART SM-01-3600A Manual

13. TRANSPORTING STORAGE

When transporting the generator. turn the engine
switch and the fuel valve OFF. Keep the generator level
to prevent fuel spillage. Fuel vapor or spilled fuel may
ignite.
WARNING
Contact with a hot engine or exhaust system can
cause serious burns- or fires. Let the engine cool
before transporting or storing the generator.
Take care- not to drop or strike the generator
when transporting. Do not place heavy objects
on the generator.
Take care- not to drop or strike the generator when
transporting. Do not place heavy objects on the gene-
rator.
Before storing the unit for an extended period:
• Be sure the storage area is free of excessive humi-
dity and dust.
• Service according to the table below.
STORAGE TIME
Less than 1
month
1 to 2 months
2 months to 1 Fill with fresh gasoline and add gasoline conditioner drain the carburetor float bowl
year
Remove the spark plug. Put a tablespoon of engine oil into the cylinder. Turn the engine slowly
1 year or more
After removal from storage-, drain the stored gasoline into 3 suitable container, and fill with fresh
*Use gasoline conditioners that are formulated to extend storage life
Contact your authorized generator dealer for conditioner recommendations
EN
1. Drain the carburetor by loosening the drain screw.
Drain the gasoline
Gasoline is extremely flammable and is explosive
under certain conditions. Perform this task in a well
ventilated area with the engine stopped. Do not
smoke or allow flames or sparks in the area during
this procedure.
2. Change the engine oil.
3. Remove the spark plug, and pour about a table-
spoon of clean engine oil into the cylinder. Crank the
engine several revolutions to distribute the oil, then
reinstall the spark plug.
4. Slowly pull the starter grip until resistance is felt. At this
point, the piston is coming up on its compression stroke
and both intake and exhaust valves are closed. Storing
the angina in this, position will help to protect it from
internal corrosion.
RECOMMENDED SERVICE PROCEDURE TO
PREVENT HARD STARTING
No preparation required
Fill with fresh gasoline and add gasoline- conditioner
Drain the fuel sediment cup
Fill will: fresh gasoline and add gasoline conditioner*
Drain the carburetor float bowl
Drain the fuel* sediment cup
with the pull rope to distribute the oil
Reinstall the spark plug
Change the engine oil
gasoline before starting.
into a suitable container.
33