Onkyo TX-SR302 Instruction Manual page 8

Index to parts and controls
Rear panel
For operational instructions, refer to the page indicated in brackets.
1
REMOTE CONTROL [16]
Connect the Onkyo components that have
CD player, and cassette tape deck using the
with them. When these components are interconnected, they can be
controlled from the remote controller provided with the
TX-SR302.
For correct operation, the audio connection cables must also be
connected. This applies to both remote and standard operation.
2
ANTENNA [14, 15]
These terminals are for connecting the FM antenna and AM
antenna.
3
FRONT SPEAKERS B [13]
These terminals are for connecting the speaker system B.
4
FRONT SPEAKERS A, CENTER SPEAKER
and SURROUND SPEAKERS [13]
These terminals are for connecting the speaker system A, including
the center and surround speakers.
5
AC OUTLET [11]
The TX-SR302 is supplied with AC outlet for connecting the power
cord from other devices so that their power is supplied through the
TX-SR302. By doing this, you can use the STANDBY/ON button
on the TX-SR302 to turn on and off the connected devices as well.
6
DIGITAL INPUT OPTICAL, COAXIAL
[10, 11]
These are digital audio inputs. There is 1 optical jack and 1 coaxial
jack. The inputs accept digital audio signals from DVD, LD, CD, or
other digital source.
7
SUBWOOFER PRE OUT [13]
This terminal is for connecting an active subwoofer.
8
FM
AM
ANTENNA
75
connectors such as a
cables provided
FRONT FRONT CENTER
SPEAKERS B SPEAKERS A SPEAKER
R L R L
8
CD IN [10]
Connect the output terminal on the CD player to the CD IN L/R
jacks on the TX-SR302.
9
TAPE IN/OUT [10]
Connect the output terminals (PLAY) of the cassette tape deck or
MD recorder to the TAPE IN L/R jacks on the TX-SR302 and the
input terminals (REC) to the TAPE OUT L/R jacks.
p
VIDEO 1 IN/OUT, VIDEO 2 IN, VIDEO 3 IN [11]
Connect the output terminals (PLAY) of the video cassette recorder
to the VIDEO 1 IN L/R jacks on the TX-SR302 and the input
terminals (REC) to the VIDEO 1 OUT jacks.
Connect the output terminals of the video cassette player or satellite
tuner to the VIDEO 2 IN or VIDEO 3 IN jacks on the TX-SR302.
q
DVD [11]
Connect the DVD player. If the DVD player has 5.1 channel output
terminals, connect each terminal to the FRONT L/R, CENTER,
SUBWOOFER, and SURR L/R terminals on the TX-SR302. If the
DVD player has only 2 channel output terminals, connect to the
FRONT L/R terminals on the TX-SR302.
w
MONITOR OUT [10]
This output is for connecting television monitors or projectors.
Tip
The audio input jacks of the TX-SR302 do not accept direct
connection of an analog turnable.
If you want to connect a turntable to the TX-SR302 prepare a phono
equalizer and connect it to the unused audio input jacks (IN L/R).
Refer to the instruction manuals of the phono equalizer and
turntable for details.
SURROUND
SPEAKERS
AC OUTLET
R L