Table of Contents
Advertisement
soiled clothing. Do not remove the external covers when the device is connected to the
power. Maintenance and repair work may only be carried out by authorized persons subject
to the safety and operating conditions applicable to electrical equipment.
2. GENERAL DESCRIPTION
This welding machine is used for manual welding by direct current and alternating
current using Manual Metal Arc (MMA) and Gas Tungsten Arc Welding (GTAW), also
known as Tungsten Inert Gas (TIG) welding. In the design and construction of the
device the latest developments in the field of PWM technology (pulse width
modulation) and IGBT modules (bipolar transistors with an insulated gate) were used,
thanks to which the welder is characterized by small size and low weight.
The ARC FORCE function is available during MMA welding. During TIG welding it is
possible to regulate the rise and fall of current, pre-outflow and gas outflow as well as
pulse and AC current parameters. The device has a memory of 10 sets of parameter
settings for the TIG HF and MMA methods.
3. TECHNICAL PARAMETERS
Model
Input Voltage(V)
Frequency (Hz)
Power Capacity (KVA)
Max Input Current (A)
No-load Voltage(V)
Rated Duty Cycle (%)
TIG/MMA Current range(A)
ARC Force Current range (%)
Hot Start Range (%)
DC Pulse MMA
AC MMA Frequency (Hz)
Sync AC/DC MMA
Pulse TIG Frequency (Hz)
Pulse TIG Duty (%)
Sync TIG Offset Current(A)
Base Current (%)
Initial / Final Current (%)
Up / Down Slope Time (S)
Pre / Post Flow Time (S)
Base Current (%)
Pulse Frequency (Hz)
Duty Cycle (%)
Electrode Dia (mm)
Offset Current(A)
HTIG-200P MIX AC/DC
1*220V-240V+1*110-120V
74V(230V) 70V(110V)
5~200 / 20~180
0.2-500
5-95 (>200Hz Duty 50%)
20~250 (Duty 50%)
1.6, 2.0, 2.5, 3.2, 4.0
0.2~500
5-95 (>200Hz Duty 50%)
0.0~15.0
0.1~15.0 / 0.5~15.0
4
50/60
7.1
43
60
0-150
0-150
10-100
± 20A
± 35A
10-100
10-100
Advertisement
Table of Contents
