Description Of Operation - Genesis 200 MIX AC/DC Owner's Manual

For example: If the welder wants the weld corrugation to be denser, the MIX Freq can be
adjusted higher.
*Adjusting the MIX ratio can control the strength of the AC ARC and the weld
penetration.
For example: When the welder wants to increase the penetration depth to improve the weld
quality when welding thick plates, he can set the MIX ratio to be smaller and use DC ARC to
increase the penetration depth.
6. PREPARATION OF THE DEVICE FOR WORK
If the device is stored or transported in low temperatures, the device should be
brought to the right temperature before starting work.

6.1 DESCRIPTION OF OPERATION

7
5
6
8
1 2 3 4
(1) Negative polarization socket"-" (2) Gas connector
(3) Remote socket (4) Positive polarization socket"+"
(5) Supply power wire (6) Ground terminal (7) Switch on/off (8) Spigot shield gas
15