Presetting Xm Radio Channels - Onkyo TX-NR1000 Instruction Manual

Using the main unit with tuner board
Hide thumbs Also See for TX-NR1000:
Table of Contents

Advertisement

C- HDSAT.fm 9 ページ 2007年3月7日 水曜日 午後1時53分

Presetting XM Radio Channels

You can store a combination of up to 40 of your favorite XM
channels and AM/FM radio stations as presets.
1
Tune into the XM channel that you want to store
as a preset.
2
Press the [MEMORY] button.
The MEMORY indicator appears and the preset number
flashes.
3
While the MEMORY indicator is displayed
(about 4 seconds), use the SELECT/PRESET
dial or Preset Up/Down buttons to select a pre-
set number from 1 through 40.
4
Press the [MEMORY] button again to store the
channel.
The channel is stored and the preset number stops flash-
ing.
Repeat this procedure for all of your favorite XM chan-
nels.
I Selecting Presets
1
To select a preset, use the SELECT/PRESET
dial or Preset Up/Down buttons, or the remote
controller's CH [+/–] button.
I Deleting Presets
1
Select the preset that you want to delete.
See the previous section.
2
While holding down the [MEMORY] button,
press the [TUNING MODE] button.
The preset is deleted and its number disappears from the
display.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C-hdsatIntegra dtr-10.5Integra research rdc-7.1

Table of Contents