Onkyo TX-NR1000 Instruction Manual page 19

C- HDSAT.fm 19 ページ ２００７年３月７日 水曜日 午後１時５３分
❑ INVALID CHANNEL
Displayed if you select an unavailable channel.
❑ CALL SIRIUS
Displayed when you select a channel to which you are not
subscribed. Call SIRIUS if you want to subscribe.
❑ CHECK SIRIUS TUNER
Displayed if the SiriusConnect receiver is not connected.
Make sure the SiriusConnect receiver is connected prop-
erly, and make sure its AC adapter is plugged in.
Positioning the SiriusConnect
Home Antenna
You can check the strength of the SIRIUS Satellite Radio sig-
nal and adjust the position of the SiriusConnect Home antenna
accordingly.
1 Press the [SETUP] button.
2
Use the [ ]/[ ] buttons to select "SAT Radio
Setup," and then press [ENTER].
3
Use the [ ]/[ ] buttons to select "Antenna
Aiming," and then press [ENTER].
4 Adjust the position of the SiriusConnect Home
antenna so that the SAT signal strength bar is
as long as possible.
™
If you can't receive a satellite signal, adjust your
antenna so that the Terrestrial signal strength bar is as
long as possible.
Terrestrial signals are only available in certain areas.
So long as the signal strength is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.
19