Moving And Transporting The Printer; Moving The Printer; Transport - Epson SL-D500 Series User Manual

SL-D500 Series User's Guide
Moving and Transporting
the Printer
This section describes how to move and transport the
product.
Caution:
❏ When lifting this printer, make sure you use
the correct posture.
❏ When lifting the product, place your hands in
from the front of the printer as shown in the
illustration below.
If you hold any other areas, the printer may
fall or your fingers could be trapped and
damaged when placing the printer.
❏ Do not lift the product while its internal
components are pulled out. Dropping it could
cause an injury.
Appendix
c
Important:
When moving or transporting the printer, be sure
that it is level; do not tilt it at an angle or place it
upside down. Otherwise, ink could leak out.

Moving the Printer

This section explains how to move the printer over
short distances, such as to a different location within
the same building.
c
Important:
Lift the printer up when moving it. Don't slide it to
the side. Otherwise, it may break down.
Preparing to Move
Make the following preparations in advance before
moving the printer.
❏ Remove all paper from the paper cassette.
❏ Turn off the printer and remove all cables.
Operations after Moving
After moving, make sure that the print head is not
clogged before use.
"Print Head Nozzle Check" on page 60
U

Transport

This section explains how to transport the printer.
Preparing to Transport
A
Remove all paper from the paper cassette.
137