Epson SL-D500 Series User Manual page 124

SL-D500 Series User's Guide
Message
code
W-1308 Front cover is closed.
W-2202 It is time to reset the ink levels.
W-2204
W-2205 Power Cleaning cannot be completed.
W-2208 Ink initialization failed.
W-2325 Failed to check nozzle clogging.
W-2326
W-2327
W-2349
W-2360 Nozzle check is recommended.
W-2361
W-2362
W-2401 Maintenance box not installed
W-2402 Maintenance box is at the end of its
service life
W-2403 Maintenance box cannot be recognized
W-2405 You cannot use a maintenance box that
has been installed in another printer.
Problem Solver
Message
124
Solution
Open the front cover according to the instructions on the
screen on the control panel of the printer.
The ink is low. Fill the ink tank with ink.
Be sure to update the ink levels after refilling the ink.
"Refilling Ink" on page 51
U
There is not enough ink remaining to do Powerful Cleaning,
so cleaning cannot be executed.
Check the printer's ink tank, and then fill it.
Be sure to update the ink levels after refilling the ink.
"Refilling Ink" on page 51
U
There is not enough ink remaining to do initial charging, so
initial charging cannot be executed.
Confirm whether the ink tanks for all the colors of ink are
being filled.
Repairs are needed if all the colors of ink are being filled.
Contact your dealer or Epson Support.
Could not read the check pattern of the Auto Nozzle Check
function.
If necessary, do a nozzle check.
"Print Head Nozzle Check" on page 60
U
If you repeat this and the same error occurs, then a sensor
may be malfunctioning.
Contact your dealer or Epson Support.
The print head's auto nozzle check function detected
clogged nozzles.
Check the print results and clean the print head if needed,
and then start printing again.
"Print Head Nozzle Check" on page 60
U
Install the maintenance box.
"Replacing Maintenance Box" on page 53
U
Replace the maintenance box with a new one.
"Replacing Maintenance Box" on page 53
U
Reinstall the maintenance box. If the same error occurs even
after reinstalling the maintenance box, then replace it with a
new one (do not install a faulty maintenance box).
"Replacing Maintenance Box" on page 53
U
Replace the maintenance box with a new one.
"Replacing Maintenance Box" on page 53
U