Selecting Xm Radio Channels - Onkyo TX-8522 Instruction Manual

TX-8522_XMsection.book 4 ページ ２００６年５月２日 火曜日 午後１時４１分
CATEGORY
TUNING DOWN/UP

Selecting XM Radio Channels

There are three ways to select XM radio channels:
• Direct tuning: enter channel number.
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
Note:
You can't select Channel Search or Category Search
mode, while the Tuning Arrow
flashing, as tuning is in progress.
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1 Press the [DIRECT TUNING]
button.
Receiver
Remote
controller
Within 8 seconds, use the
2
number buttons to enter the
Receiver
channel number.
The channel is selected.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENTER].
Remote
controller
4
Number buttons
ENTER
DIRECT TUNING
TUNING MODE
DIRECT TUNING
■ Channel Search Mode/Category Search Mode
Selecting an XM radio channel on the receiver:
indicators are
Selecting an XM radio channel with the remote
controller:
Number
buttons
RETURN
ENTER
1 Press the [TUNING MODE]
button to select "Channel
Search" or "Category Search"
mode.
2 Press the [CATEGORY] button
repeatedly to select a category.
3
Use the TUNING [UP
[ DOWN] buttons to select a
channel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
1 Press the [ENTER] button to
Remote
controller
select "Channel Search" mode.
While the "Category Search"
2
mode is selected, use the Left
and Right [
select a category.
3
Use the Up and Down [
buttons to select a channel.
Channel number
To listen to the previously selected XM
channel, press the [RETURN] button.
/ / /
] and
]/[ ] buttons to
]/[ ]
Channel name