Table of Contents
Advertisement
1 5
Move the multi stick toward b or B
repeatedly to select "1 Way" to record
on one side, or "Cycle" (or "Relay") to
record on both sides, then press PUSH
ENTER.
1 6
Press SYNC REC to select "CD t
TAPE B", then press PUSH ENTER.
Deck B stands by for recording and the CD
player stands by for playback. The TAPE B
N indicator (for front side) lights and the
TAPE REC PAUSE/START button flashes.
1 7
When "PUSH ENTER!" flashes, press
PUSH ENTER.
Recording starts.
T o st op re c ording
Press x.
T o c a nc e l t he m e nu ope ra t ion
Press MODE SELECT.
T o c he c k t he orde r
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select "Set Up Mode", then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select "CD Set Up ?", then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select "PGM Check Clear ?", then press
PUSH ENTER.
5 Move the multi stick toward b or B.
The disc number and the track number appears.
6 After checking the program, press MODE
SELECT.
Downloaded from:
https://www.usersmanualguide.com/
T o c a nc e l Progra m Edit
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select "Set Up Mode", then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select "CD Set Up ?", then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select "Play Mode Set Up ?", then press
PUSH ENTER.
5 Move multi stick toward b or B repeatedly to
select "All Discs" or "1 Disc", then press PUSH
ENTER.
The tracks continue playing in their original order.
T ip
When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure
after pressing SYNC REC in step 16 in this page.
1 Press MODE SELECT repeatedly to select "Set
Up Mode", then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly to
select "TAPE Set Up ?", then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly to
select "DOLBY NR Set Up ?", then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly to
select "On", then press PUSH ENTER.
"DOLBY NR" appears in the display.
To return to the original setting, repeat steps 1
thruogh 4 and select "Off" in the step 4.
c ont inue d
67
Advertisement
Table of Contents
