Indoor Unit Setting - Samsung AVXC1 Series Installation Manual

Indoor Unit Setting

1
Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
2 The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02) and
RMC(SW03, SW04) rotary switches.
 The designs and shape are subject to change according to the model.
Setting MAIN Address
 The MAIN address is for communication between the indoor unit and the
outdoor unit. Therefore, you must set it to operate the air conditioner
properly.
 You can set the MAIN address from '00' to '99' by mixing SW01 and SW02.
The MAIN address from '00' to '99' should differ from each other.
 Check the indoor unit address on the plan that you are to install and set
the address according to the plan.
Note
You may not need to set MAIN address if you selected Auto
Address Setting from the outdoor unit: see details on the outdoor
unit installation manual.
For Example When MAIN address is set as "12".
Setting RMC Address
 You must set the SW03, SW04 and K2 switch when using the centralized controller.
For Example When RMC address is set as "12".
SW03 SW04
SW01 SW02 SW03
K1 K2 K3 K4 K5 K6 K7 K8
SW04
K9K10K11K12
25
E-