JVC UX-A52R Service Manual page 23

Removing the cassette hanger assembly
/ cassette holder (See Fig.5)
Prior to performing the following procedure, remove
the side bracket (L) and (R).
1. Remove the slit washer attaching the cassette
hanger assembly and pull out the pin.
2. Move the cassette hanger assembly in the direction
of the arrow to release the boss of the joint c on the
left rear side and detach the cassette hanger
assembly upward.
REFERENCE: The cassette hanger assembly is
detached with the cassette holder.
Removing the pinch roller (F) and (R)
Prior to performing the following procedure, remove
the side bracket (L), (R), cassette hanger assembly /
cassette holder.
1. Release the tab d in the direction of the arrow and
pull out the pinch roller upward.
REFERENCE: The above method is for removing the
pinch roller (F) and (R).
Tab d
Fig.7
(See Fig.6 to 8)
Pinch roller (F)
Cassette hanger assembly
Cassette holder
Fig.5
Pinch roller (F)
Fig.6
Pinch roller (R)
Fig.8
UX-A52R
Pin
E-washer
Pinch roller (R)
Tab d
1-23