Elation PROMETEUS MAXIMUS User Manual page 31

S Y S T E M M E N U
PERSONALITY - Display Setting – Key Lock
When ON, Control Panel buttons lock automatically after exiting main menu for 15 seconds. To
unlock, keep MODE/ESC button pressed for 3 seconds.
PERSONALITY - Reset Default
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION!
This function restores all fixture settings to the factory default settings. The password is 011 and
must be entered each time a reset is performed.
EFFECT ADJUST – Test Channel
Auto test each individual channel function independently from the DMX control board.
EFFECT ADJUST – Manual Control
Select and manually test and fine adjust each individual channel function
Independently from DMX control board. This function will center PAN and TILT motors and set
dimmer to 100%. PAN and TILT functions will still operate if the fixture needs to be positioned to a
flat clear surface. With the individual functions, you can focus the light on a flat surface (wall) and
perform fine adjustments.
EFFECT ADJUST – Calibration
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION!
This function allows small adjustments to be made to the Pan, Tilt, and Zoom movements to
compensate for ware or in the event a sensor has been knocked slightly out of place. Because
improper use of this function can result in undesired operation this function has been password
protected. The password is 050 and must be entered each time the calibration menu function is
entered. Because calibration is an extremely delicate procedure, instructions on performing this action
are left out of this manual. For a first-time calibrator, please contact our customer support team for
step-by-step instructions.
31