Elation PROMETEUS MAXIMUS User Manual page 22

F I X T U R E I N S T A L L A T I O N
OMEGA BRACKETS INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the Omega
Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener
is completely locked. Omega Brackets can be installed into the fixture base as illustrated below.
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade rigging
clamp to the included Omega Brackets using an M10 screw fitted through the center hole of the
Omega Brackets. The fixture provides a built-in rigging point for a SAFETY CABLE. Be sure to only
use one of the designated rigging points for the safety cable and never secure a safety cable to a
carrying handle.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working load
limits, installation material being used, and periodic safety inspection of all installation material and
the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation
can result in bodily injury.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT INCLUDED) THAT
MEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES AND REGULATIONS WHENEVER
INSTALLING FIXTURE IN A SUSPENDED ENVIRONMENT!
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet Switch
that supports IGMP (Internet Group Management Protocol) is required. Using a Gigabit Ethernet
Switch that does not support IGMP can cause erratic behavior of all connected devices to the
switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
22