10. To list the files type the command:
more :filenam:e2 (Enter)/(Return)
11. To find out what CE.utilities tests are already on the HP-UX operating
system, type one of these command sets:
~d /usr/diag/CE.utilities
(Enter)/(Retum)
or
cd /usr/dio.g/instal.l
(Enter)/(Return)
ls
(Enter )/(Return)
12. If you want to run a test that is not already on HP-UX, you must first
copy the test from the tape to the HP-UX file system. A new directory,
/usr /CE.utilities, will automatica.l1y be created and the files from the tape
will be copied into it. Type this command where test is one of the eight
test files you want to copy from the tape to the file system:
lifcp
-r
/dev/drive:test -
I
cpio -icdvm
(Enter)/(Retum)
Information on each CE.utility test may be found as follows:
a. CRTADJ: refer to System Support Tape User's Guide.
b. FLOAT: type these commands
cd /usr/CE .utilities/Floatcard
(Enter)/( Return)
. /help
(Enter)/( Return)
and a help file will appear on the screen.
c. SFT: refer to the Series 300 Test Tools Manual.
d. ECC: type these commands:
cd /etc
(Enter )/(Return)
man ecclogger {Enter)!( Return)
for information on setting up and execution the ECC tests.
Refer to the System Support Tape User's Guide and the Series 300 Test Tools
Manual for detailed information on running the CE.utilitiP.s.
5-14 Diagnostics