General Safety; Protection Devices Installed On The Appliance - Electrolux ecostore Premium User Manual

Stage
Dismantling
Scrapping
Key:
●
○
—
A.3

General safety

• The appliances are provided with electric and/or mechanical safety devices for protecting workers and the appliance itself.
• Never operate the appliance, removing, modifying or tampering with the guards, protection or safety devices.
• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the appliance, or parts of it, without guards or with guards removed. This is purely for
explanatory purposes. Do not use the appliance without the guards or with the protection devices deactivated.
• Do not remove, tamper with or make illegible the marking and safety, danger and instruction signs and labels on the appliance.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• Carefully avoid exposure of the equipment to ozone - do not use ozonizers in the rooms where the equipment is installed.
• The following operations have to be carried out by specialised authorised personnel or Customer Care Service provided with all
the appropriate personal protection equipment (A.2 Personal protection equipment), tools, utensils and ancillary means, who can
ask the manufacturer to supply a servicing manual:
– Installation and assembly
– Installation of the refrigerant fluid condensing unit
– Positioning
– Electrical connection
– Appliance cleaning, repair and extraordinary maintenance
– Appliance disposal
– Work on electrical equipment
– Dismantling operations of appliances which use R290 or R-744 (with a refrigeration system under high pressure)
– Dismantling operations of appliances which use flammable insulation blowing gases;
A.4

Protection devices installed on the appliance

Guards
The appliance has:
• fixed guards (e.g. casings, covers, side panels, etc.), fixed to the appliance and/or frame with screws or quick-release connectors
that can only be removed or opened with tools; therefore the user must not remove or tamper with such devices. The
Manufacturer declines any liability for damage due to tampering or their non-use;
• interlocked movable guards (door) for access inside the appliance;
• appliance electrical equipment access panels or doors, made from hinged panels openable with tools. The panel or the door
must not be opened when the appliance is connected to the power supply.
1. The noise emission values have been obtained according to EN ISO 11204. The value could increase depending on the workplace where
measured.
Protective Safety footwear
garments
PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF NECESSARY
PPE NOT REQUIRED
ON
OFF
Gloves
●
●
Disconnect the appliance from the power supply before
carrying out any installation, assembly, cleaning or
maintenance procedure.
1
Glasses Safety helmet
—
—
5