Table of Contents
Advertisement
The appli-
— — — —
ance does
not switch on.
The inside
temperature
— — — —
is too high.
The appli-
ance is too
— — — —
noisy.
— — — —
• Electric supply issue
• Door left open
• Issue with thermostat
setting
— — — —
• Excessive load
• Heat source near the
appliance
• Unit unlevelled or touch-
— — — —
ing other equipment
• Make sure the plug is prop-
erly inserted in power socket.
• Make sure the socket is
powered.
• check (if present) the suit-
ability of the fuse on the
plug; otherwise contact the
assistance service to replace
the fuse, which must have
the same characteristics as
the one being replaced.
• If the problem persists Call
Service.
• Make sure the doors close
properly.
• Check the thermostat setting.
• Make sure there is no heat
source near the appliance.
• Make sure the product is
correctly loaded.
• If the problem persists Call
Service.
• Make sure the appliance is
properly levelled. An unbal-
anced position can set off
vibrations.
• Make sure the appliance is
not touching other equip-
ment or parts which could
reverberate.
• If the problem persists Call
Service.
15
Advertisement
Table of Contents
