Epson ActionTower 7500 User Manual page 135

7. If you are installing a CD-ROM drive, you will need to
connect the audio cable; it has small plastic connectors at
either end. Follow the instructions that came with your
sound card to connect the audio cable to the card. If you
need to install a sound card, follow the instructions under
"Installing an Option Card" in Chapter 4.
8. Position the audio cable connector so that the tab faces up
and aligns with the notch in the CD-ROM drive's audio
connector. Then push in the connector.
9. If you installed a hard disk drive, replace the plastic
faceplate for the bay you used. Insert one side of the plate,
then gently press on the other side until it snaps into place.
10. If you have finished installing or removing drives, replace
the computer's cover, as described under "Replacing the
Cover" in Chapter 4. Then see "Using the Fixed Disk Setup
0ptions" in Chapter 2 for instructions on defining your
new drive configuration.
6-14 Installing and Removing Tower Drives