Epson ActionTower 7500 User Manual page 112

3. Slide the bracket away from the mounting area and lift it out
4. Remove the screws securing the hard disk drive to the
bracket and slide the drive out of the bracket.
5. Replace the bracket following the instructions under
"Replacing the Bracket in the Computer."
6. If you have finished installing or removing drives, replace
the computer's cover, as described under "Replacing the
Cover" in Chapter 4. Then see "Using the Fixed Disk Setup
0ption" in Chapter 2 for instructions on defining your new
drive configuration.
5-14 Installing and Removing Slimline Drives