Table of Contents
Advertisement
Removing the Drive Mounting Bracket
Your computer has a 3.5-inch diskette drive and a hard disk
drive installed in a mounting bracket. In order to install or
remove any drives, you must first remove the drive mounting
bracket. Follow these steps:
1.
Remove the two cables from the diskette drive, as shown
below. Grasp the connectors and pull them straight out so
you do not bend the pins; do not pull on the cables.
2.
Remove the two cables from the hard disk drive.
Installing and Removing Drives in the Slimline Computer
5-4
Advertisement
Table of Contents
