Table of Contents
Advertisement
Diskette
Hard disk and
other IDE
devices
Interfaces
Monitor
Parallel
Serial
A-4
Specifications
Controller on main system board supports
up to two diskette drives, or one
diskette/ combo diskette and one tape
drive
Two PCI, ATA-2 compatible, IDE
interfaces on main system board support
up to four IDE devices (two on each
interface); IDE CD-ROM drives cannot be
connected to the primary IDE interface or
to the same interface as IDE hard disk
drives; BIOS provides hard disk
auto-sensing and enhanced IDE functions
Energy Star compliant video interface for
fixed or multi-frequency monitor built into
system board; 15-pin, D-shell connector
One standard, multimode parallel
interface built into main system board;
supports S-bit unidirectional, 16-bit
bidirectional and ECP (Extended
Capability Port) modes; 25-pin, D-shell
connector; operation controllable by
SETUP program and jumpers
Two high-speed RS-232C, programmable,
asynchronous interfaces built into main
system board; 16C550 compatible; 9-pin,
D-shell connectors; operation controllable
through SETUP
Advertisement
Table of Contents
