Photographing With User Defined White Balance - Epson PhotoPC 800 User Manual

Photographing With User Defined White
Balance
Follow these steps to customize the white balance setting:
1
Turn the camera dial to
If necessary, change to Program or Manual user mode.
2
Press the MENU button (under Camera SETUP ) to
go to the Camera SETUP menu.
3
Open the lens cover.
to display the SETUP menu.
4
Press the bottom button (next to the entry New W/B ).
You see the following screen:
5
Press the bottom button (next to Yes ) to save a new
white balance setting.
You see a message instructing you to press the shutter
button to set a new white balance.
6
Focus the camera on a piece of white paper, or some
other object to set white balance by, and press the
shutter button to save the setting.
7
Open the lens cover and turn the camera dial to
see the View menu.
Using the LCD Menus to Change Settings 4-21
4
A
B
. You