Interval Shooting - Epson PhotoPC 800 User Manual

The camera beeps each time it captures an image, and
the timer light on the front of the camera flashes as the
images are processed.

Interval Shooting

You can use this time lapse feature to capture scenes that
change over time, such as a sunset or a busy street corner.
Your camera lets you set a time interval from 10 seconds to
24 hours. Interval shooting is available for all user modes.
NOTE
When you're adding audio recordings or taking pictures with
HyPict image quality, the shortest time interval available is 20
seconds.
Follow these steps to use the time lapse feature:
1
Secure the camera on a flat surface or on a tripod. (See
page A-4 for information on attaching the camera to a
tripod.)
4-12 Using the LCD Menus to Change Settings
2
Open the lens cover, then turn the camera dial to
Wait until the camera status light turns green.
You see a preview of your picture on the LCD screen,
with a red frame around it. CONTINUOUS appears on
the screen.
3
Hold down the MENU button (under PRESS or
HOLD ) until you see the following screen:
time lapse
interval setting
The current setting for the time lapse interval (hours,
minutes, and seconds) appears in the center of the
screen, with seconds highlighted.
.