Table of Contents
Advertisement
Using Optional Lenses
Although you can use any standard 37mm video
camcorder lens or filter with PhotoPC 500, lenses
manufactured by Tiffen are recommended. Call DC Pro at
(800) 522-7835 for ordering information.
To attach a lens, screw it onto the camera as shown below.
When you use a close-up lens, the viewfinder does not give
you an accurate preview of your picture. The best way to
take pictures is by using the optional LCD Monitor, as
described in Chapter 9, or by connecting the camera to
your computer as described in Chapter 3.
Attaching PhotoPC 500 to a Tripod
You can use your PhotoPC 500 digital camera with any
standard tripod.
Follow these steps:
1
Assemble and set up the tripod following the
manufacturer's instructions.
2
Make sure the tripod is well balanced on a flat surface.
3
Find the opening for the tripod screw on the bottom of
your camera.
4
Carefully place the PhotoPC 500 on the tripod, and
screw the camera on until it is firmly in place.
5
Follow the manufacturer's instructions to adjust the
tripod to view your subject.
Using Optional Accessories A-7
A
B
Advertisement
Table of Contents
