Selecting Memory Settings; Creating Memory Settings; Renaming Memory Settings - Epson PowerLite Pro Cinema 9100 User Manual

Selecting Memory Settings

You can easily recall the memory settings by using the
memory button on the remote control.
1. Press the
Memory
2. Select
Load Memory
3. Use the arrow buttons to select the desired setting, then
press the button.
Enter
After a moment, the image appears on the screen using
the retrieved settings. Certain settings may not be
applied, depending on the input signal.

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 37 and color
settings on page 39. Before saving them to memory, adjust the settings to the desired levels.
1. Press the
Memory
2. Select
Save Memory
3. Select the memory name you want to use, then press the
settings.
Note: Saved settings are indicated by a green highlight
a name that is already in use, the existing settings will be erased and new ones saved in their
place.

Renaming Memory Settings

With the Pro Cinema 9500 UB, you can rename memory settings so that they are easier for
you to recognize.
1. Press the
Memory
2. Select
Rename Memory
3. Select the memory name you want to change, then press the
selection screen is displayed.
4. Do one of the following:
■
To select a name from the displayed preset names, select the desired name and press
the button.
Enter
button on the remote control.
.
button on the remote control.
.
button on the remote control.
.
Memory
button
button to save your
Enter
next to the memory name. If you select
button. The name
Enter
Making Detailed Adjustments
43