Sharpness and Picture Quality Settings
If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to
correct it.
■ Sharpness
Image > Sharpness
Use this function to make lines and edges appear more distinct in the image. This setting
is stored separately for each image source and color mode setting. You can select
to adjust the sharpness of the entire image, or select
Standard
following submenu:
Note: The Advanced setting cannot be used with a signal input through the PC port.
Choose
Thin-Line Enhancement
Thick-Line Enhancement
You can also access this setting by pressing the
■ Progressive
Signal > Progressive
Converts interlaced to progressive signals. The projector uses 3D DigiScan
Circuitry Processing for video-sourced images. For film-sourced images, you can select
from 2-2, 2-3, or 4-4 pulldown detection, depending on your model.
Leave the setting on
viewing movies on a player that produces interlaced output. Select
videos captured with a video camera. With the Pro Cinema 9100, set to
viewing images with a large amount of movement. With the Pro Cinema 9500 UB, set to
if flickering appears with the
Film
Note: This setting can be used only when viewing composite video or S-video signals, or 480i
or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 68).
For the Pro Cinema 9500 UB, this setting cannot be changed while the 4-4 Pull-down setting
is turned on (see page 39).
to sharpen details such as hair and clothing. Choose
to sharpen large contours and backgrounds.
(Pro Cinema 9100) or
Film/Auto
setting.
Auto
Advanced
button on the remote control.
Sharpness
(Pro Cinema 9500 UB) for
Film
Video
Making Detailed Adjustments
to access the
™
HD
for watching
when
Off
37