Choosing The Aspect Ratio - Epson PowerLite Pro Cinema 9100 User Manual

Choosing the Aspect Ratio

In many cases, video signals are automatically resized to fit
on your screen when
You may need to change the size of the image (or aspect
ratio) for certain image types by pressing the
on the remote control.
Select one of these settings:
■ Normal
or images with a 4:3 aspect ratio.
■ Full
for images recorded in squeeze mode.
■ Zoom
for images recorded in 16:9 (wide-screen) format.
■ Wide
for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only
the right and left sides of the image; the central part is unchanged.
■ Anamorphic Wide
9500 UB only). This lets you display images recorded at a 2.35:1 aspect ratio using the
projector's built-in scaler. If you use this setting without an anamorphic lens, the image
fills the screen but not at the correct aspect ratio. If your anamorphic lens has a motorized
transport, you may be able to operate it automatically with the
page 47).
Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port,
the aspect ratio is automatically selected and you cannot change it.
If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use
the Zoom Caption Pos. option and other settings to resize and reposition the image. For details,
see page 46.
For details on how the projector resizes the picture when you choose an Aspect setting, see
page 68.
28
Making Basic Adjustments
is selected as the Aspect setting.
Auto
for standard TV broadcasts, computer images,
4:3 image using Normal setting
when using a commercially available anamorphic lens (Pro Cinema
button
Aspect
16:9 image using Zoom setting
Aspect
button
port (see
Trigger out