Troubleshoot Ing; Pc On-Screen Messages - Sony SDM-V72W Operating Instructions Manual

Troubleshoot ing

Before contacting technical support, refer to this section.

PC on-screen messages

If there is something w rong w ith the PC input
signal, one of the follow ing messages appears
on the screen. See pages 35 to 38 for possible
remedies.
Trouble sympt oms and remedies
If a problem occurs as a result of a
connected computer or other equipment,
refer to the connected computer/
equipment's instruction manual.
Use the self-diagnosis function (page 39)
if these recommendations do not resolve
the problem.
Downloaded from: https://www.usersmanualguide.com/
If " Not Supported Signal" appears
This indicates that the input signal is not
supported by the display's specification. Set the
resolution and refresh rate of the computer's
graphics board as indicated in the message. Also
check to see cables are connected to the
appropriate input connectors.
If " No Input Signal" appears
This indicates that no signal is being input via the
connected computer. Check to see if a cable is
connected to this input signal. Also check if the
computer is in Pow er Save mode by pressing any
key on the keyboard or by moving the mouse.
The " No Input Signal" message w ill disappear
after 5 seconds and enter Pow er Save mode.
If " Cable Disconnected" appears
This indicates that the cable has been
disconnected from the connector. Check to see
cables are securely connected to the appropriate
connector. The " Cable Disconnected" message
w ill disappear after 5 seconds and enter Pow er
Save mode.
- 34 -