PRECAUTION WARNING FOR THE SAFETY-RELATED COMPONENT. WARNING BE CAREFUL ELECTRIC SHOCK ! • There are some special components used in LCD monitor that are important for safety. These parts are • If you want to replace with the new backlight (CCFL) or marked on the schematic diagram and the inverter circuit, must disconnect the AC adapter...
TIMING CHART << Dot Clock (MHz), Horizontal Frequency (kHz), Vertical Frequency (Hz), Horizontal etc... (µs), Vertical etc... (ms) >> Back Porch Blanking time Total Period Video Active Time Front Porch Sync Duration Sync Mode Frequency Resolution Polarity Clock Sort – 31.500 720x400 28.350...
TIMING CHART VIDEO SYNC OPERATING INSTRUCTIONS FRONT VIEW REAR VIEW D-Sub Signal Connector See front control panel Power Connector Front Control Panel MENU 1. Power switch and indicator This switch turns the dislay on and off. 4. OK Button This power indicator lights up in green when the This button select the item or executes the settings display is turned on, and lights up in orange when in the menu.
1) Prepare timing and pattern data for a signal c. Adjust "SUB CONTRAST " to secure the color generator according to the Sony timin specifications. temperature. 2) Connect a monitor video cable to the signal generator. d. Press "OK" key to exit adjust mode.