Epson PowerLite 1825 User Manual page 85

5. For the WEP encryption setting, highlight
press .
Enter
6. For Format, highlight
enable hexadecimal input. Then press
7. If you chose
64Bit
Highlight the
Encryption key
Key ID you selected, then press
button to select individual letters; then press
character. To add a blank space or to navigate backward and
forward through the input text, highlight the arrows and press
. To toggle symbol settings or capital letters, highlight the
Enter
option and press
Enter
press .
Enter
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■ For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
For 128 bit WEP encryption with ASCII or text input, enter
■
13 alphanumeric characters.
For 64 bit WEP encryption with ASCII or text input, enter 5
■
alphanumeric characters.
9. When you're done making these settings, select
, and then select
Setup complete
to save the changes. Press
to enable text input or
ASCII
Enter
, choose , ,
Key ID 1 2 3
text box that corresponds to the
. Press the
Enter
. When you're done, highlight
to confirm that you want
Yes
to exit the menu system.
Menu
or and
128Bit 64Bit
to
HEX
.
, or .
4
pointer
to input a
Enter
and
Finish
, select
Return
Presenting Through a Wireless Network
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try
ASCII
first. If that doesn't work,
try and then
Text2 Text3
85
.