Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. If you want to prevent the SSID from being displayed on the
standby screen, set the
8. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
9. When you're done making these settings, select
, and then select
Setup complete
to save the changes. Press
Now you're ready to set up your computer to project wirelessly. Go to
"Configuring the Network Settings for Windows" below, or "Setting
Up Your Mac for Ad Hoc Mode" on page 66.
option to
SSID Display
setting to
.
Off
to confirm that you want
Yes
to exit the menu system.
Menu
.
Off
, select
Return
Presenting Through a Wireless Network
63