Epson PowerLite 1825 User Manual page 69

Highlight the
SSID
follows:
Press the pointer button to select individual letters; then press
to input a character. To add a blank space or to navigate
Enter
backward and forward through the input text, highlight the
arrows and press
Enter
letters, highlight the option and press
highlight and press
Finish
Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. If your access point assigns IP addresses automatically, turn on
. Otherwise, turn off DHCP and enter the following
DHCP
information:
: Enter the IP address you want to assign to the
■
IP address
projector. It must be formatted like other addresses on the
network. The last section should be unique.
■
Subnet mask
depends on how your network is set up.
■
Gateway address
the access point or AirPort base station when it was set up.
8. If you want to prevent the SSID from being displayed on the
standby screen, set the
9. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
10. When you're done making these settings, select
, and then select
Setup complete
to save the changes. Press
text box, press , and enter a name as
Enter
. To toggle symbol settings or capital
Enter
.
Enter
: For example: 255.255.255.000, but this
: Enter the IP address that was assigned to
option to
SSID Display
setting to
Off
to confirm that you want
Yes
to exit the menu system.
Menu
. When you're done,
.
Off
.
, select
Return
Presenting Through a Wireless Network
note
For specific details about
your network, please consult
your network administrator.
If you don't know your
gateway or access point
address, see page 75. If
you're using AirPort, start
the AirPort Admin utility,
select your base station and
click . Then click
Configure
the tab to see your
Network
base station's IP address.
69