Playing On The Keyboard; Turning Power On Or Off - Casio Casiotone CT-S1000V User Manual

Playing on the Keyboard

Turning Power On or Off

1.
Press P (Power) to turn on Digital Keyboard power.
"Casiotone" is displayed while startup is in progress.
• Your Digital Keyboard is ready to use when the home screen appears on the display after
startup is complete.
• Depending on the user lyric tone addition status, the usage status of samples and other data, it
may take some time for the Digital Keyboard to become ready for use.
2.
To turn off power, long-press P (Power) until the display goes blank.
• Turning off power normally causes the tone and rhythm number and other settings to return
to their initial defaults. However, the settings below are remembered.
– PEDAL2 pedal type
– PEDAL2 calibration
– Sampled melody tone (type, loop note value and repeats)
– Sampled drum tone (note off, type, loop note value and repeats)
– MY SETUP power on recall
– Wireless setting
– MIDI OUT Channel (Upper1, Upper2, Lower)
– MIDI Sync Mode
– Auto Power Off
– Battery type
– Display contrast
– Button long-press time
• Pressing the P (Power) to turn off power actually puts the Digital Keyboard into a standby state.
Minute amounts of current continue to flow within the Digital Keyboard in the standby state. If you do
not plan to use the Digital Keyboard for a long time or if there is a lightning storm in your area, be
sure to unplug the AC adaptor from the power outlet.
• You can configure Digital Keyboard settings so MY SETUP settings are recalled whenever power is
turned on. See "Enabling MY SETUP Power On
• Do not touch the PITCH BEND wheel when turning on power.
B
Recall" (page EN-144).
EN-26